Cheeky! I discovered a trick to make some mache stuff not stick to things. Why would you want to do that, you ask? Well, I decided to do the mouth side membranes with this new material I spoke about a few posts ago, but the thing with that is… it’s very fragile. After some experiments I realised that it just breaks if you try to pull it loose after it’s dry. So what I did was put some masking tape where I wanted it to be loose, and it worked great. This way, I was able to paint inside of the cheeks without ruining the mouth (breaking fangs, painting things accidentaly…). Check out the pictures!
After the paint was dry, I glued both ends and it was done. The mouth is looking pretty good, don’t you agree? I don’t have pictures of this, but to give the face a bit of shape, I used an experimental mix of PVA glue, paper pulp, flour and gypsum. It wasn’t awful, but it wasn’t the best either… the “recipe” definitely needs some tweaking. I also made the horns with Fimo -as usual- and I shaped them in a way that would fit the piece perfectly. If you look at the pictures you will notice they just follow the lines of the “flesh”. Normally I glue the horns after I do the skin, but I decided to do the opposite this time because of how I made the horns “click in”. I thought it would look a lot more natural doing it this way. I hope I’m right!
Hi hi, hello! It’s been a while, hasn’t it? As you may have read, my computer broke down fatally very unexpectedly. It’s amazing the amount of attachment one slowly develops around bits of inanimate materials put together if we use them often. Luckily, what broke down didn’t affect the hard drives, so I didn’t lose anything. And also, it was the perfect excuse to upgrade, so I got myself a brand new shiny piece of that human technology that I so dearly missed having. A bit fancy, but not super fancy. It looks pretty cool though, judge for yourselves:
Now, regarding dragons… I’ve made quite a bit of progress on the new one, so expect some more new posts soon! Now, let me tell you a bit about the dragon I’m making now. His name is Evakyl’usk, or Evak for short. He was a friend, a loved character among us. He was quite the chatty fellow, always cheerful, ever so wise and kind, always willing to listen and brighten up your spirits. He… changed though. Over the years he became colder and distant, and his once bright orange skin started to turn darker. He once told me when I visited him that he was struggling with some inner turmoil and that he felt he was changing. I offered to help by consulting higher powers or magic, but soon after that he announced he was leaving… and so he flew away to never come back. It’s been many a century now, and I don’t even know if he’s still alive, but I still remember him fondly, and so I decided to make a sculpture of his head.
I started by making paper mache balls, as usual, and hollowing them afterwards. This time, instead of using both jaw pieces as they were, I cut a bit off, because paper mache is not as flexible as Evakul’s jaws and I wanted to achieve a dramatic angle, hah. In the picture below, you can see the sketch I made of the head before I began working on it.
First, I cut some normal cotton fabric to size and dipped it in PVA glue. This makes a nice “mouth skin”. This time I didn’t have to make new teeth, since I made so many in the last batch. But if you didn’t know, I make them with Fimo (the kind of polymer clay you need to bake). As usual, I just hot-glued them to the jaws and wrapped them in PVA fabric. With a twist this time, though! I found this new material which is a very lightly woven blend of cotton and rayon fibers which is very tricky to work with, but it looks great and is a lot less temperamental than normal cloth when trying to make it stay in place. Also it’s so thin that overlapping layers are almost invisible to the eye! Check it out:
Now, I know I always talk about how great of a thing bitumen of Judea is, but apparently the vast majority of people doesn’t even know what it is, so let me enlighten you. Bitumen of Judea is a liquid consisting of basically a bit of oil and a chemical component found in asphalt that had a very deep and rich dark brown colour. It is mostly used for wood staining and other wood treatments, but I love using it on anything that will take it. I don’t think I’ve ever shown you exactly what it looks like when used, so I put together both jaws after coating the teeth of one of them with bitumen of Judea, so you can see the before and after. Amazing, isn’t it? It makes those fangs look a lot more natural, more like real bone.
Now, let me wrap up by saying that if you’re interested in making one of these dragon trophies of your own, I recommend Dan Reeder’s “Paper Mache Dragons” book -which I own- where he explains his technique step by step with pictures. I’ve taken inspiration from there to make most of the initial steps to put these trophies together. Anyway, that’s all for now. As I said, I’ll be posting again very soon. I hope you’re enjoying a warm week of spring wherever you are. Bye bye for now!
I promised yesterday to post pictures of finished Odrajux… and I’m delivering! I experimented a bit with things here and there while making him, so it was quite fun. I wholeheartedly hope you like it as much as I do and spread the word so he can find a home! His measurements are 29cm wide, 35cm high and 48cm long, and he weighs 1.3kg. He is now for sale for £520 (£550 on Etsy). Shipping cost to mainland UK is £30.98 with insurance covering up to £100. If you want to extend that to a full cover, it would be an extra £19.80. Contact me for options to ship outside of the UK.
Thank you all for the support and have a fantastic day!
Hello humans! Odrajux is finished! In this post I’ll just quickly show you the process of painting him, but I’ll be taking proper pictures soon to show you. Odrajux has been the dragon that’s taken me the longest time to paint so far. I tried a different approach: instead of painting with “bright” colours and then black-washing to add depth, this time I went for a very dark base and slowly added layers of lighter tones until it was just right. This is true for the red/brown areas of the dragon though. I still black-washed the neck plates and chin.
So I decided to start with the lighter colours: white and ochres, and then gave the rest of the dragon an umber coat. It looked pretty good already! Once dry, I started giving it layers of plain red. Loads of layers. Even more than you think. But eventually, it became opaque enough to look red. Time consuming as it was, this actually gave the whole thing a lot of depth. I also blended in a tiny bit of blue and sienna here and there to add to the richness. Once the colours were pretty solid (that would be the last picture), I proceeded to black wash the lower neck, and then I worked on dry-brushing all of the details, highlights and shadows. Again, this took quite a bit of time due to drying times (using that much retarding medium didn’t help!), but it looked great in the end. Also, I used significantly more paint than usual, but it looks pretty nice. I’m not showing any pictures of the finished thing on this post, but I will soon! Stay tuned!
Hi folks! I hope you’re all doing great. Before I show you all of the progress on Odrajux, I’d like to take a moment to thank to all of you who follow me for linking and sharing the love. I’ve noticed an exponential boom in followers in these last two weeks and it’s both humbling and overwhelming to see that so many people are interested in what I do. So thank you all so much from the bottom of my scaly heart!
Anyway! These last couple of days I’ve pretty much left Odrajux ready for his paintjob.The first thing I did was his ear membranes. I had already glued the supports, so all there was left to do was cut some fabric to size and fix it in place. I cut big pieces, dipped them in PVA glue and placed them roughly where they should be. I marked the areas where the supports were, and cut the fabric while lying flat on the table. Sometimes cutting sharp angles with proper scissors it’s just impossible when you’re limited by hard edges like in this case. This made the cutting a lot easier! Once the ears were done, I covered some other areas with cloth, and proceeded to grab the clay.
So now that the cloth was done, the fun part began! The clay I used for this was some old-school white Das. This was the first clay I ever used, about two decades ago, so it’s the kind of clay I’m most comfortable with. The good thing is that it’s air-dry, so you don’t have to bake it or anything. The cons are that even though it doesn’t shrink much, it does tend to crack. And also it can dry up quite quickly if you’re not careful (especially where it’s thinnest). I avoid that by spraying water every now and then on it, and you can refill the cracks later.
I started working from the mouth towards the shield, so the first thing I did was the chin. I wrapped the clay around the aluminium structure and shaped it. I did the same for the lower lip, but I added little holes and small nostrils. Also, I modified the length of the lips by adding “lip fangs”: small triangular bits that you’ll recognise to be very dragon-like as soon as you see them. I protected the teeth with some acetate and cling film to avoid messing them up… and then I did the rest of the face (jaws, cheeks and brows). Scroll down to see the results.
Now, the cheekbones turned out to be a bit smaller than I anticipated. I had planned on adding loads of small Fimo horns, but the area was too small and I decided to make thorny scales with Das instead. I put some in the jaws and around the eyes, and added spikes of different sizes all along the top: from the nose to the shield, and left it to dry overnight. Luckily, the Scottish damp and cold climate made it dry quite slowly, so the cracks were few and minimal and it took literally two minutes to fix. The final touch was adding a bit of paper mache to simulate eyebrow wrinkles and also to make the nostrils a bit larger. I think he looks a bit more menacing that way! What do you think?
Have you ever left some masking tape taped onto something and came back after a month? I’ll tell you what happens… it unsticks and curls on itself! Poor Odrajux was in the coveredinmaskingtape state when I left him. When I came back from my trip he looked like an unrecognisable party mummy. So after making the new tongue, I gave him a nice coat of paper mache to get the tape back where it was meant to be stuck. I just used kitchen roll for that.
Now that he was fine again, I began working on the supports for the ear membranes. This time, I’ll be showing you more in detail how I do it. Basically, I just measure how long they need to be and cut strong steel wire adding about 3 more centimetres. Then, I tear lengths of newspaper and roll them around until I get the desired thickness. To secure it, I wrap tape all around each “stick”. The good thing about this, is that they remain fully flexible, and I can bend them as I please on the piece. Once I like how they look, I use hot glue to stick them in place. After double checking everything is alright, I cover them in paper mache (newspaper). This not only helps the tape to stay in place, but also makes gluing cloth and painting them a lot easier. Also it looks a lot nicer! Check the pictures:
Right. So I know a number of you has been concerned about how “shoddy” his face looks, since at this stage with the other trophies I’ve shown in the past, their faces look a lot more neat and complete. The thing is, I’ve been experimenting with a different process, because I find that using only cloth for the face is not only very time-consuming, but it’s also difficult to get right, since I like to cut only a few big chunks of the perfect shape to fit large surfaces (as opposed of using a lot more smaller pieces that would look a lot worse). By doing this, I waste a lot of time and cloth, and it’s not very customisable anyway. So this time, I got myself some paper pulp and more Das clay. I know exactly what I want to do, so we will see if it works or not.
I’ll show you what I’ve done so far, which is adding some structure with aluminium foil and paper pulp paste, covering some areas with cloth, and adding the neck scales. I found that covering aluminium with paper pulp helped a whole lot, since fabric mache sticks to the paper paste and not to the aluminium foil, which is often problematic. Also, I can smooth out the texture so the texture of the fabric looks smooth instead of having lots of tiny spikes and bumps. It’s a bit more costly, but I think it’s totally worth it, so I will probably keep on doing this kind of thing this way. Now the only things missing before adding the horns and the clay are the cheeks and the membranes. You’ll be seeing that soon though!
So, jaws were done. Tongue was done. I tried putting the tongue I made a while back in the mouth… and it looked awful. I realised how ill-fitting that tongue was for someone like Odrajux. The old one was a thick, round slab of flesh. But what this mouth needed was something more vipery, more aggressive. Made to frighten, not to speak. And thus, I decided to redo it!
For the new tongue, I used the same technique as usual, but made it look quite different. I took plenty of pictures for you to check out, including the colouring process. These photos are pretty self-explanatory, but to summarise, basically what I did was shape some newspaper into long cones and attached them to some steel wire. Then, I gave the mouth a bit more shape with more newspaper and more tape before covering everything in paper mache. I used a special kind of kitchen roll that has little bumps on it that look like taste buds (I’ve told you about it before). It looks really nice! Once dried, I painted it with acrylics. As you can see in the pictures, I like to adjust the colour on the spot, by squirting more paint on the piece while it’s still wet. In the end, I gave it a purplish-dark-brown wash and also a glossy varnish. If you have any questions, do ask! I can’t wait to show you the whole thing put together, it looks pretty amazing.
Hello folks! It’s been a while. I’m back now though, and things are going back to normal, so expect regular updates once again. Today I’m just making a quick post to show you some pictures of the progress I’ve made on the fearsome Odrajux. One a side note, Anachromie has been sold! She was a labour of love and I will miss her… but that’s the way it goes.
Time for celebration! Now only because of the holiday season, but also because The Arcane Dragonry just opened a shop on Etsy! Etsy (as well as Paypal) offers a very safe and controlled environment where you, your money and your purchases are covered, in case something goes terribly wrong, so it’s perfect for those of you who are extra wary of buying things on this amazing thing we call the Internet.
If you’ve been reading my posts, you know that I’ve been working on another project as I worked on the last stages on Anachromie. This other project is a red dragon called Odrajux. Now, this is a figure of renown from Abeir-Toril (my homeland). He existed long before my time so I never met him, but it’s written that he was vicious and feral when young. When he became large enough, he took off to never return. We know of him from the tales of terror from the north, where apparently he became the scourge of (mostly) human villages for centuries. He was eventually defeated in an epic battle by a large group of seasoned mercenaries. However, he became a legend that’s been immortalised in books and still lives in folklore up to this day. Now, since I haven’t really posted any progress on Odrajux, this is going to be a long post. You’ve been warned!
Somebody asked me a while back to explain a bit better how exactly I make the teeth, so this time around I remembered to take a picture with all of the steps on it. First, I make a roll of Fimo. Secondly, I cut it in different lengths. After that, I roll out the ends until they’re pointy and cut it in half. That makes two teeth. Then, I just round the cut edge and they’re ready to bake! The trick to make white Fimo look like aged bone, is giving it a coat of Bitumen of Judea thinned down with turpentine. I don’t recommend using white spirits or any other turpentine substitute. I know it would be much cheaper, but I find that it somehow messes up the distribution of the pigment and also dries to be a bit sticky to the touch. See the picture below with all of the steps mentioned:
Easy, right? Right. Feel free to ask any questions if you do have them! Anyway. Odrajux was quite the horned dragon. And so I had to make quite a few horns and spikes. I hope it’ll be enough! I also made enough teeth for next time. I wanted to make his mouth VERY menacing, so I used very long and sharp teeth glued close together. Down below you can see the layout before I glued them in.
Now, I’m sorry I forgot to take pictures between those two steps. Sometimes I get sooo into it, I forget to do things! Also, my work space was turned into a makeshift photography studio for two days in order to take “proper” pictures of Anachromie… which was a nightmare, but I already complained about that on the last post, so I won’t elaborate. To make these jaws I used the same technique as usual (which I’ve wrongly failed to mention in the past) has been defined by the great artist Dan Reeder and it’s one of his most wonderful additions to the “cloth mache” world. He is a great person, as well as a great artist, and as I mentioned while making Kaltakess, he’s been my inspiration to make these trophies. I highly recommend his book “Paper Mache Dragons” (which I proudly own). There, he explains how to make dragons in a lot more detail than I provide, and much of the initial process you see here on my website like hollowing paper mache shapes, attaching the piece to a wooden shield, making the jaws and creating skin/scales with cloth, have been taken from this book. For now, I am bound to make head trophies due to space restrictions, but hopefully that will change in the future. I can’t wait to try and make full-bodied dragons!
Anyway, to summarise, to make the mouth, I hot glued the teeth to the paper mache pieces. Then, I used small strips of plain cotton dipped in PVA glue to “hug” each tooth tightly, and laid out the inside loosely with a large piece of gluey fabric (is that even word?!). I must admit, lately I’ve been using an awful lot of super glue. If you look closely, you will notice that the cloth that goes inside of the mouth pieces is folded on most of the ends. I don’t just lay it on top the “gums”, I’ve found that I quite like the folded look better. It makes for a more natural transition between all those dozens of different pieces of fabric (that are folded as well). The trick to make it look so good, is to use a drop of super glue on each of the “sockets” between the teeth. I’m sorry I didn’t illustrate this process better. I will try my best to remember next time.
To make the tongue, I just shaped some brown paper until it had the shape I wanted, and secured it with some masking tape. Then, to give it texture, I just paper-mache’d some upside-down pieces of kitchen roll that have little bumps that resemble a real tongue quite well. Sounds strange, I know, but check the picture below to see what I mean. Does it not look good?
For the paint, I used a dark tone of red and umber for the tongue, and a mix of red, purple and a lot of light grey. Adding grey to a colour is an easy way of making the colour a lot less saturated and more natural-looking, so you don’t have to paint-wash it too much later to make it look better. Once dried, I gave everything (including the teeth) a black wash with Bitumen of Judea in different concentrations to highlight or darken areas. After this, I simply gave everything a glossy varnish finish (two coats on the tongue to make it extra shiny). Gloss is the cheap, modest way to make something look wet. To accentuate this, what I do is using a brush with long bristles. I dip it in water and then dip it in a glossy sealer (Mod Podge in this case), and apply it in a chaotic fashion while the brush is in a very low angle, so there’s a lot of friction with the surface. Because the texture is irregular and full of folds, it makes the watery sealer bubbly, and guess what? The bubbles don’t go away. Instead, they dry as they are, so it looks like saliva. Also, the parts that have a bit more glue dry up to be a bit whitish, which also resembles saliva. I know it’s not very noticeable in the picture, but trust me, it works and it’s visible. For me, this is wet enough. If you want to make your dragon’s mouth VERY wet and drooly, you could just use clear liquid resin/epoxy. I’ve been thinking about using this on Odrajux, since he’s so vicious and scary, but we will see. I don’t particularly like drooly things or beings in general. I find them almost revolting.
Didn’t I warn you? It was going to be a long one. It may not look like much, but making the mouth of a dragon trophy head is about 1/4 – 1/5 or so of the total progress, so what you see here is about a week’s worth of work. Anyway, I hope you enjoyed it. I’ll keep you posted!